MM PEC H-Cell 2x15 mL- Magnetic Mount Photo-Electrochemical H-Cell

[powr-form-builder id=eb1c42d8_1505226564]

  • €2,600.00

Order today, and we'll ship your package beetwen and .


PRICE RANGE: 2.4k - 2.6k €

This is a horizontally mounted, double compartment photo-electrochemical H-Cell used to simultaneously investigate thin film photo-anodes and cathodes. The cell elements are made of PEEK. It well fits aqueous and organic solvent electrolyte requirements. The construction is gas-tight having two separate chambers, each equipped with gas inlet and outlet. This allows bubbling the solution and evacuating gases. Chambers are separated with an ion-exchange membrane (e.g. DuPont’s Nafion® membrane), so the electrochemial products appearing at photo-anode and cathode do not affect the opposite electrode.  

Application note
This cell allows several approaches to perform measurements in 2- or 3-electrode setups. It is designed to investigate performance of a thin film photo-anode (e.g. nanocrystalline material or conducting polymer) deposited on a rigid or flexible transparent substrate (typically fused quartz glass). The cathode (counter electrode) is mounted in the second chamber either in a top casing or attached on the side of the cell as a thin film deposited on rigid or flexible substrate. The reference electrode is mounted in a top casing of the same chamber as the photo-anode. Various auxiliary electrodes are suitable for this cell including metal wire, gauze and foil electrodes as well as non-metal electrodes and thin films. Typical applications include: basic photochemistry, photolytic water splitting, photoinduced charge separation and photocorrosion. For troubleshooting instruction see the redox.me blog post.

Specification
nominal exposure area: 1 cm2
minimum electrolyte volume: 2x10 mL
maximum electrolyte volume: 2x15 mL
electrode plug diameter: 6 mm
recommended substrate size: 25 mm x 25 mm
maximum substrate thickness: 3 mm

Product includes
2 top casings
2 chambers
2 magnetic sample holders
4 plugs
1 set of O-rings
4 flangeless nuts for gas intel/outlet (1/16’’, 1.6 mm tubing) 
4 flangeless ferrules (1/16’’, 1.6 mm tubing)
2 metal pillars

Related products
Metal wire auxiliary electrodes 
Non-metal auxiliary electrodes 
Reference electrodes  
Fused quartz window glass
Glassy (vitreous) carbon substrates – GC 25/25/custom


We Also Recommend