Electrode Polishing Kit

[powr-form-builder id=eb1c42d8_1505226564]

  • €326.00

SKU: ACC-POL_KIT

Order today, and we'll ship your package between and .


This Electrode Polishing Kit contains various polishing materials for routine cleaning, thorough cleaning and re-polishing for disk electrodes. 

Application note
1. Routine cleaning performed before every use
a)  remove the backing and stick the microcloth pad to glass plate; the pad can be re-used only with the same type (particle size) of alumina suspension;
b) dispense a few droplets of alumina suspension 0.05 µm;
c) polish the electrode surface while keeping the electrode surface parallel to the surface of the pad. Make a figure-8 pattern while slowly turning the electrode around its own axis;
d) clean the electrode using brush and soap; rinse the electrode and the microcloth pad thoroughly with water.

2. Thorough cleaning performed when the disk surface loses its shine and becomes dull
a) remove the backing and stick the nylon pad to any flat surface; the nylon pad can be re-used with any type (particle size) of alumina suspension;
b) dispense a few droplets of alumina suspension 1 µm;
c) polish the electrode surface while keeping the electrode surface parallel to the surface of the pad.  Make a figure-8 pattern while slowly turning the electrode around its own axis;
d) clean the electrode and the nylon pad using brush and soap; rinse the electrode and the nylon pad thoroughly with water; 
e) remove the backing and stick the microcloth pad to glass plate; the pad can be re-used only with the same type (particle size) of alumina suspension;
f) dispense a few droplets of alumina suspension 0.3 µm;
g) polish the electrode surface while keeping the electrode surface parallel to the surface of the pad. Make a figure-8 pattern while slowly turning the electrode around its own axis;
h) clean the electrode using brush and soap; rinse the electrode and the microcloth pad thoroughly with water;
i) Using a different microcloth pad devoted to alumina suspension 0.05 µm, perform polishing according to point 1. 

3. Re-polishing of the disk electrode with a damaged surface
a) remove the backing and stick the abrasive pad to any flat surface;
b) polish the electrode surface while keeping the electrode surface parallel to the surface of the pad.  Make a figure-8 pattern while slowly turning the electrode around its own axis;
c) clean the electrode using brush and soap; rinse the electrode thoroughly with water; dispose of the abrasive pad;
d) Using the nylon pad with alumina suspension 1 µm and two different microcloth pads devoted to alumina suspension 0.3 µm and 0.05 µm, perform polishing according to point 2. 

    Specification
    pad diameter: 73 mm (2.875'')

    Product includes
    1 x double side glass plate
    10 x abrasive paper
    5 x microcloth pad
    5 x nylon pad
    1 x alumina suspension, 1 µm, 50 mL
    1 x alumina suspension, 0.3 µm, 50 mL
    1 x alumina suspension, 0.05 µm, 50 mL

    Intrastat data
    HS Code: 34059010
    Country of Origin: Sweden
    NET weight: 100 g (the whole kit - 500g)

    Related products
    Disk Electrodes

    Customer Reviews

    Based on 1 review Write a review

    We Also Recommend